2) M.Knudsen, Modelling and control of temperature distribution. Second Scandinavian Workshop on Hyperthermia. Lund, October 1983.
3) M.Knudsen,L.Heinzl,J.Nielsen and E.Z.Rath, Hyperthermia system with self-tuning control of temperature profile in tissue. 4th International Symposium on Hyperthermic Oncology. Aarhus, July 1984. ( Poster and summary paper, Taylor and Francis).
4) M.Knudsen and J.E.Duhn, Estimation of thermal model parameters. 4th International Symposium on Hyperthermic Oncology. Århus, July 1984. ( Poster and summary paper, Taylor and Francis).
5) M.Knudsen and J.Overgaard, Identification of thermal model for human tissue. IEEE Trans. Biomedical Engineering, May 1986.
6) M.Knudsen and U.Hartmann, Optimal temperature control with phased array hyperthermia system. IEEE Trans. Microwave Theory and Techniques, May 1986.
7) M.Knudsen and L.Heinzl, Two-point control of temperature profile in tissue. International Journal of Hyperthermia,vol 2 nr 1, 1986.
8) M.Knudsen and P.Rubak, Determination of loudspeaker parameters using a system identification technique. 82nd Convention of Audio Engineering Society. London, March 1987. (Preprint 2445).
9) M.Knudsen, Estimation of tissue blood flow from hyperthermia treatment data.International Journal of Hyperthermia, Sept. 1989.
10) M.H.Knudsen, J.Grue Jensen, V.Julskj‘r and P.Rubak, Determination of loudspeaker driver parameters using a system identification technique. J.Audio Eng.Soc.,Vol.37,No.9, Sept.1989.
11) M.Knudsen and L.Heinzl, Self-tuning temperature control for multi applicator hyperthermia system. Poster and Proceedings paper, 5th International Symposium on Hyperthermic Oncology, Kyoto Japan, Sept. 1988.
12) M.H.Knudsen,P.Hansen and J.Grue Jensen, The significance of viscoelastic effects in loudspeaker parameter measurements. 88th Convention of Audio Engineering Society. Montreux, March 1990. (Preprint 2905).
13) P.Hansen and M.Knudsen, System Identification of nonlinear loudspeaker. Ninth IASTED Int. Conf. on Modelling, identification and Control, Innsbruck, Febr.1990.
14) H.Rasmussen, M.Knudsen, T.Knudsen, H.B›rsting and N.Bidstrup, Control of Induction motor drives.1992.
15) J.G.Jensen and M.Knudsen, Simulation of nonlinear systems (with Matlab or analog omputer). Thechnical report (in danish), AUC 1992.
16) M.Knudsen and J.G.Jensen, Low-frequency loudspeaker models that include suspension creep. J.Audio Eng.Soc., Vol.41, No.1/2, 1993.
17) M.Knudsen, Estimation of physical parameters in linear and nonlinear dynamic systems. PhD thesis, AUC 1992.
18) M.Knudsen, Estimation of loudspeaker parameters. Technical report, AUC 1993.
19) H. Bo›rsting, M.Knudsen, H.Rasmussen and P.Vadstrup, Estimation of mechanical signals in induction motors using the recursive prediction error method. EPE'93, 1993.
20) H. Bo›rsting, M.Knudsen, H.Rasmussen and P.Vadstrup, Estimation of physical parameters in induction motors. 10th IFAC Symposium on System Identification, Preprint Vol.2 p.549. 1994.
21) M.Knudsen, A sensitivity approach for estimation of physical parameters . 10th IFAC Symposium on System Identification, Preprint Vol.2 p.231. 1994.
22) M.Knudsen, Direct estimation of physical parameters in nonlinear loudspeaker models . 10th IFAC Symposium on System Identification, Preprint Vol.2 p.249. 1994.
23) H.Bo›rsting, M.Knudsen and P.Vadstrup, Standstill estimation of electrical parameters in induction motors using an optimal input design. EPE'95, Sevilla 1995.
24) H.Rasmussen, M.To›nnes and M.Knudsen, Inverter and motor model adaption at stand-still using reference voltage and measured currents. EPE'95, Sevilla 1995.
25) M.Knudsen and J.Grue Jensen, Estimation of nonlinear DC-motor modelsusing a sensitivity approach. Third European Control Conference, ECC'95. Rome 1995.
26) M.Knudsen and J.Wang, Modelling and parameter estimation of a 400 KW wind turbine. Internal report, 56 pp. ISSN 0908-1208, Aalborg University 1995.
27) M.Knudsen, Loudspeaker modelling and parameter estimation. 100th AES Convention, Audio Engineering Society Preprint, Copenhagen, May 1996.
28) H.Rasmussen, M.Knudsen and M.Tønnes, Parameter estimation of inverter and motor model at stand-still, using measured currents only. IEEE International Symposium on Industrial Electronics, P-96-4154, pp.331-336. Warsaw, Poland, June 1996.
29) M.Knudsen, SENSTOOLS Manual, Internal report R96-4151-ISSN0908-1208, Aalborg University 1996.
30) M.Knudsen, Determination of parameter estimation errors due to noise and under modelling. IEEE Instrumentation and Measurement Conference, Brussels, June 1996.
31) In AES Anthology, Loudspeakers Vol.4, M.R.Gander ed., M.Knudsen, J.Grue Jensen, V.Juelskjær and P.Rubak, Determination of loudspeaker driver parameters using a system identification technique. pp.422-431, 1996.
32) M.Knudsen et al, An Interactive Multimedia Based Instruction in Experimental Modelling - Integrating Matlab with an Authoring Program. 4th International Conference on Computer Aided Engineering Education, Krakow Poland, September 1997.
33) J.N›rgaard Nielsen, M.Knudsen et. al. Network-based Database Course. 4th International Conference on Computer Aided Engineering Education, Krakow Poland, September 1997.
34) M. Knudsen and J.N.Kj‘r, Manual for produktion af Computer Based Instruction med Medi8or, I-1997-4185, Maj 1997.
35) M.Knudsen and T.S.Petersen, Proceskontrolingeni›r fra Aalborg Universitet. Dau, Tidsskrift for Dansk Automationsselskab, Nr.1 Februar 1998.
36) O. Borch, M.Knudsen et.al., Distributet Project Work. CALISCE'98, 4th International Conference on Computer Aided Learning and Instruction in Science and Engineering, Sweden, June 1998.
37) M.Blanke and M.Knudsen, A Sensitivity Approach to Identification of Ship Dynamics from Sea Trial Data. IFAC Conference CAMS'98: Control Applications in Marine Systems. Fukuoka, Japan. October 1998.
38) M.Knudsen, En ingeniøruddannelse i Proceskontrol. Dansk Kemi no. 12/ 79. årgang pp.26-27. Teknisk Forlag, ISSN 001-6335 December 1998.
39) M.Knudsen, J.N.Nielsen, and J.Østergaard, A Computer Based Instruction in Matlab. CBLIS'99, 4th International Conference on Computer Based Learning in Science, Twente, the Nederlands. July 1999.
40) M.Blanke and M.Knudsen, Optimized Experiment Design for Identification of Marine Systems. 14th IFAC World Congress; Beijing China, July 199.
41) Borch O. , Helbo J. , and Knudsen M., From Classroom Teaching to Remote Learning. Euro Education 2000, Aalborg.
42) Knudsen M. , Helbo J. , Jensen L.P. , Rokkjær O. , Borch O. , and Østergaard J., Project Work in Networked Distance Education. International Conference on Networked Learning, Lancaster UK, April 2000.
43) M.Knudsen, Master i Industriel Informationsteknologi - en
fjernuddannelse
med speciallisering i IT i Proceskontrol. Tidsskrift for DAu (Dansk
Automationsselskab), Nr.1, 2001.
44) Helbo J. , Knudsen M. , Jensen L.P. , Borch O. and Rokkjær O. Group Organized Project Work in Distance Education. ITHET 2001 Conference, Kumamoto, July 2001.
45) Jensen L.P. , Helbo J. , Knudsen M. & Rokkjær O. Project organized Problem-based learning in Distance Education. International Journal of Engineering Education (to appear).
46) Helbo J. and Knudsen M. Distance Education in Information
Technology,
a Case Study. Budapest, July 2002.
47) Knudsen M., Experimental modeling of dynamic systems (lecture
note). Department of Control Engineering, Aalborg University, Version
0.1, 2003
48) Borch O. , Helbo J. , Knudsen M. , and Rokkjær
O. UniFlex
A WWW-environment for project-based collaborative learning.
ITHET'03, 4th International Conference on Information Technology Based
Higher Education and Training, Marrakech, July 2003.
49)
Ole E. M. Borch, Jan Helbo, Morten Knudsen, Ole Rokkjær,
UniFlex Collaborative on-line learning environment tool
Aalborg University, Denmark. 2003 UNEV
(Universiteternes Efter og Videreuddannelse) http://www.unev.dk
50) Jan Helbo, Ole Rokkjær, Morten Knudsen, Ole Borch , Didactic Changes in Distance Education in Master of Industrial Information Technology (MII), International Conference on Networked e-learning for European Universities, Granada, Spain. ISBN 9090175148. November 2003.
51)
Knudsen M. , Bajard C. , Helbo J. , Jensen L.P. , and Rokkjær O. Project-Based
Collaborative Learning in Distance Education.
In Anette Kolmos, Flemming K. Fink and Lone
Krogh, eds. The Aalborg PBL Model – Progress, Diversity and Challenges
pp.301-316
Aalborg University Press, 2004.
53)
Knudsen M. , Bajard C. , Helbo J. , Jensen L.P. , and
Rokkjær O, Project-organized collaborative learning in distance
engineering education. To appear in
Annette Lorentsen and Lone Dirckinck Holmfeldt eds. Vill Anthology, 2005
54) M Knudsen, O. Borch, J. Helbo, Didactics, Technology and Organisation of Project Based Distance Education, Proceedings of the 4th IASTED International Conference on Web-based Education, Grindelwald, Switzerland; February 21-23 2005
55)
Helbo J. and Knudsen M. Virtual Learning Environments and Learning
Forms -experiments in ICT-based learning. 5th Int. Conf. on
Information Technology Based Higher Education and Training: ITHET ‘04,
June 2004.